|
|
Build Your Online Product Catalogs?
| Product Name: |
chemical process pump
|
| Supply Ability: |
|
| Related proudcts |
pump, |
| Specifications |
Pump |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Horizontal chemical process pump
HZ (closed impeller type) chemical process pump is a single stage, single suction, cantilever type centrifugal pump which absorbs the advanced technologies from overseas, and is designed based on the advantages of F1, IH, CZ, ZBG chemical process pumps. HZ chemical process pump owns the features of better operation performance, anti-cavitation, long life of mechanical seals and bearings, reliable operation, updated structure and easy maintenance.
Parameters
Flow rate: Q= 2~2050 £¨m3/h£©
Total head: H=3~150 (m)
Speed: n=1450/2900rpm
Temperature: T=-20~250℃
S.g.: ¦Ã¡Ü1.85
Pump diameter: 50~350mm
ZGPV Chemical Process Pump Features
The impeller is a closed impeller, which uses rear blades and wear rings to balance axial forces.
The impeller and shaft are connected by a key and locked by a special impeller nut. Eliminates the possibility of impeller nuts becoming loose during operation, shutting down, and backflow.
Back-pull design, the rotating part can be removed from the housing without removing the pipe.
The sealed cavity is designed with a tapered ***ce to install the mechanical seal into a ***cious room. At the same time, the impeller rear blade, the inner surface and the guide blade work together to form a self-flushing flow sealed cavity without any external flushing fluid. Self-flushing flow can quickly eliminate the heat on the friction pair; self-flushing flow can avoid the accumulation of particles (<5%) between the moving ring and the static ring, thereby extending the service life of the mechanical seal.
chemical process pump Structure
Single-stage single-suction horizontal centrifugal pump structure, the pump cover is fixedly clamped in the middle
by the connection between the pump body and the bearing housing, and the pump cover is positioned with the bearing
port and the bearing housing.
The pump body adopts axial suction, radial discharge, foot support type, and can be directly fixed on the base. The tail of the bearing housing is |
| Company: |
Sichuan Zigong Pump & Valve Co., Ltd.
|
| Contact: |
Richard Lee |
| Address: |
No.56, Golden Hill Rd, Hi-Tech Industrial Zone, Yantan District |
| Postcode: |
643000 |
| Tel: |
13738006567 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
